Images (C# / netframework)
Note
This demo is available in your FlexCel installation at <FlexCel Install Folder>\samples\csharp\VS2022\netframework\20.Reports\65.Images and also at https://github.com/tmssoftware/TMS-FlexCel.NET-demos/tree/master/csharp/VS2022/netframework/Modules/20.Reports/65.Images
Overview
Inserting images from a database on a FlexCel report is simple, just insert a blank image and name it as <#table.field>. All the complexity is handled by FlexCel. But when you need more options, there are always things you can do.
Concepts
Using the Image Size (<#IMGSIZE(Zoom, AspectRatio)>) tag. This tag only works when written on an image name, and allows you to define which size the inserted image will have. Use this tag only if the image dimension changes on the database. If all images are the same size (most common scenario) just set the size of the image at design time, as it is faster.
Using an Alias on the config sheet. As the image name has a small length, we defined the report variables <#Photo>, <Photo100>, etc. on the config sheet.
Using the ImgPos, ImgFit and ImgDelete tags. On the second sheet of this report you can see those tags in action.
Using the FlexCelReport.GetImageData event. This is a last resort option. If you need to do some further processing on the image, you can do it on this event. The preferred order of option then is:
If all images are the same size and on a standard format, just name the image as <#table.field> and do nothing more.
If you need to adjust dynamically the image dimensions, use Image Size tag. It can be a little slower than 1, as the image has to be processed to calculate its dimensions.
If you need to define a custom image size, or the image is on a proprietary format you need to convert, use FlexCelReport.GetImageData event.
Files
AssemblyInfo.cs
using System.Reflection;
using System.Runtime.CompilerServices;
//
// General Information about an assembly is controlled through the following
// set of attributes. Change these attribute values to modify the information
// associated with an assembly.
//
[assembly: AssemblyTitle("")]
[assembly: AssemblyDescription("")]
[assembly: AssemblyConfiguration("")]
[assembly: AssemblyCompany("")]
[assembly: AssemblyProduct("")]
[assembly: AssemblyCopyright("(c) 2002 - 2024 TMS Software")]
[assembly: AssemblyTrademark("")]
[assembly: AssemblyCulture("")]
//
// Version information for an assembly consists of the following four values:
//
// Major Version
// Minor Version
// Build Number
// Revision
//
// You can specify all the values or you can default the Revision and Build Numbers
// by using the '*' as shown below:
[assembly: AssemblyVersion("7.21.0.0")]
//
// In order to sign your assembly you must specify a key to use. Refer to the
// Microsoft .NET Framework documentation for more information on assembly signing.
//
// Use the attributes below to control which key is used for signing.
//
// Notes:
// (*) If no key is specified, the assembly is not signed.
// (*) KeyName refers to a key that has been installed in the Crypto Service
// Provider (CSP) on your machine. KeyFile refers to a file which contains
// a key.
// (*) If the KeyFile and the KeyName values are both specified, the
// following processing occurs:
// (1) If the KeyName can be found in the CSP, that key is used.
// (2) If the KeyName does not exist and the KeyFile does exist, the key
// in the KeyFile is installed into the CSP and used.
// (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
// When specifying the KeyFile, the location of the KeyFile should be
// relative to the project output directory which is
// %Project Directory%\obj\<configuration>. For example, if your KeyFile is
// located in the project directory, you would specify the AssemblyKeyFile
// attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
// (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
// documentation for more information on this.
//
[assembly: AssemblyDelaySign(false)]
[assembly: AssemblyKeyFile("")]
[assembly: AssemblyKeyName("")]
Form1.cs
using System;
using System.Drawing;
using System.Collections;
using System.ComponentModel;
using System.Windows.Forms;
using System.Data;
using System.IO;
using System.Diagnostics;
using System.Reflection;
using FlexCel.Core;
using FlexCel.XlsAdapter;
using FlexCel.Report;
using FlexCel.Demo.SharedData;
namespace Images
{
/// <summary>
/// A report with lots of images.
/// </summary>
public partial class mainForm: System.Windows.Forms.Form
{
public mainForm()
{
InitializeComponent();
}
private void button1_Click(object sender, System.EventArgs e)
{
AutoRun();
}
public void AutoRun()
{
using (FlexCelReport ordersReport = SharedData.CreateReport())
{
ordersReport.GetImageData += new GetImageDataEventHandler(ordersReport_GetImageData);
ordersReport.SetValue("Date", DateTime.Now);
string DataPath = Path.Combine(Path.Combine(Path.GetDirectoryName(Assembly.GetExecutingAssembly().Location), ".."), "..") + Path.DirectorySeparatorChar;
if (saveFileDialog1.ShowDialog() == DialogResult.OK)
{
ordersReport.Run(DataPath + "Images.template.xls", saveFileDialog1.FileName);
if (MessageBox.Show("Do you want to open the generated file?", "Confirm", MessageBoxButtons.YesNo) == DialogResult.Yes)
{
using (Process p = new Process())
{
p.StartInfo.FileName = saveFileDialog1.FileName;
p.StartInfo.UseShellExecute = true;
p.Start();
}
}
}
}
}
private void btnCancel_Click(object sender, System.EventArgs e)
{
Close();
}
private void ordersReport_GetImageData(object sender, FlexCel.Report.GetImageDataEventArgs e)
{
if (String.Compare(e.ImageName, "<#PhotoCode>", true) == 0)
{
byte[] RealImageData = ImageUtils.StripOLEHeader(e.ImageData); //On access databases, images are stored with an OLE
//header that we have to strip to get the real image.
//This is done automatically by flexcel in most cases,
//but here we have the original image format.
using (MemoryStream MemStream = new MemoryStream(RealImageData)) //Keep stream open until bitmap has been used
{
using (Bitmap bmp = new Bitmap(MemStream))
{
bmp.RotateFlip(RotateFlipType.Rotate90FlipNone);
using (MemoryStream OutStream = new MemoryStream())
{
bmp.Save(OutStream, System.Drawing.Imaging.ImageFormat.Png);
e.Width = bmp.Width;
e.Height = bmp.Height;
e.ImageData = OutStream.ToArray();
}
}
}
}
}
}
}
Form1.Designer.cs
using System;
using System.Drawing;
using System.Collections;
using System.ComponentModel;
using System.Windows.Forms;
using System.Data;
using System.IO;
using System.Diagnostics;
using System.Reflection;
using FlexCel.Core;
using FlexCel.XlsAdapter;
using FlexCel.Report;
using FlexCel.Demo.SharedData;
namespace Images
{
public partial class mainForm: System.Windows.Forms.Form
{
private System.Windows.Forms.Button button1;
private System.Windows.Forms.SaveFileDialog saveFileDialog1;
private System.Windows.Forms.Label label1;
private System.Windows.Forms.Button btnCancel;
/// <summary>
/// Required designer variable.
/// </summary>
private System.ComponentModel.Container components = null;
/// <summary>
/// Clean up any resources being used.
/// </summary>
protected override void Dispose(bool disposing)
{
if (disposing)
{
if (components != null)
{
components.Dispose();
}
}
base.Dispose(disposing);
}
#region Windows Form Designer generated code
/// <summary>
/// Required method for Designer support - do not modify
/// the contents of this method with the code editor.
/// </summary>
private void InitializeComponent()
{
this.button1 = new System.Windows.Forms.Button();
this.saveFileDialog1 = new System.Windows.Forms.SaveFileDialog();
this.label1 = new System.Windows.Forms.Label();
this.btnCancel = new System.Windows.Forms.Button();
this.SuspendLayout();
//
// button1
//
this.button1.Anchor = ((System.Windows.Forms.AnchorStyles)((System.Windows.Forms.AnchorStyles.Top | System.Windows.Forms.AnchorStyles.Right)));
this.button1.BackColor = System.Drawing.Color.Green;
this.button1.ForeColor = System.Drawing.Color.White;
this.button1.Location = new System.Drawing.Point(152, 88);
this.button1.Name = "button1";
this.button1.Size = new System.Drawing.Size(112, 23);
this.button1.TabIndex = 0;
this.button1.Text = "GO!";
this.button1.UseVisualStyleBackColor = false;
this.button1.Click += new System.EventHandler(this.button1_Click);
//
// saveFileDialog1
//
this.saveFileDialog1.Filter = "Excel Files|*.xls;*.xlsx;*.xlsm|Excel 97/2003|*.xls|Excel 2007|*.xlsx;*.xlsm|All files|*.*";
this.saveFileDialog1.RestoreDirectory = true;
//
// label1
//
this.label1.Location = new System.Drawing.Point(24, 24);
this.label1.Name = "label1";
this.label1.Size = new System.Drawing.Size(288, 24);
this.label1.TabIndex = 2;
this.label1.Text = "Different ways to include images on a report.";
//
// btnCancel
//
this.btnCancel.Anchor = ((System.Windows.Forms.AnchorStyles)((System.Windows.Forms.AnchorStyles.Top | System.Windows.Forms.AnchorStyles.Right)));
this.btnCancel.BackColor = System.Drawing.Color.FromArgb(((int)(((byte)(192)))), ((int)(((byte)(0)))), ((int)(((byte)(0)))));
this.btnCancel.DialogResult = System.Windows.Forms.DialogResult.Cancel;
this.btnCancel.ForeColor = System.Drawing.Color.White;
this.btnCancel.Location = new System.Drawing.Point(272, 88);
this.btnCancel.Name = "btnCancel";
this.btnCancel.Size = new System.Drawing.Size(112, 23);
this.btnCancel.TabIndex = 3;
this.btnCancel.Text = "Cancel";
this.btnCancel.UseVisualStyleBackColor = false;
this.btnCancel.Click += new System.EventHandler(this.btnCancel_Click);
//
// mainForm
//
this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 13F);
this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
this.ClientSize = new System.Drawing.Size(416, 133);
this.Controls.Add(this.btnCancel);
this.Controls.Add(this.label1);
this.Controls.Add(this.button1);
this.Name = "mainForm";
this.Text = "Images";
this.ResumeLayout(false);
}
#endregion
}
}
Program.cs
using System;
using System.Windows.Forms;
namespace Images
{
static class Program
{
/// <summary>
/// The main entry point for the application.
/// </summary>
[STAThread]
static void Main()
{
Application.EnableVisualStyles();
Application.SetCompatibleTextRenderingDefault(false);
Application.Run(new mainForm());
}
}
}