Merging similar cells (C# / netframework)
Note
This demo is available in your FlexCel installation at <FlexCel Install Folder>\samples\csharp\VS2022\netframework\20.Reports\935.Merging Similar Cells and also at https://github.com/tmssoftware/TMS-FlexCel.NET-demos/tree/master/csharp/VS2022/netframework/Modules/20.Reports/935.Merging Similar Cells
Overview
This demo is about how to perform a common task: Merging similar cells into one.
Concepts
There are 2 ways to merge similar cells in a sheet:
Use a master-detail relationship. This is normally the way to go, just merge the master cells and have the details not merged. You can use as many master-detail levels as you want, and you can see this in the technique used in the first column of this demo.
Use <#Merge Range> tags together with <#DbValue> tags. This can be useful when you want to do the merging in every column and you don't want to define a master and a detail table for each one of them. You need to be careful when using this method to check all the columns at the left (as shown in the "Ship country" column comment), not just the value at the last record.
Files
AssemblyInfo.cs
using System.Reflection;
using System.Runtime.CompilerServices;
//
// General Information about an assembly is controlled through the following
// set of attributes. Change these attribute values to modify the information
// associated with an assembly.
//
[assembly: AssemblyTitle("")]
[assembly: AssemblyDescription("")]
[assembly: AssemblyConfiguration("")]
[assembly: AssemblyCompany("")]
[assembly: AssemblyProduct("")]
[assembly: AssemblyCopyright("(c) 2002 - 2024 TMS Software")]
[assembly: AssemblyTrademark("")]
[assembly: AssemblyCulture("")]
//
// Version information for an assembly consists of the following four values:
//
// Major Version
// Minor Version
// Build Number
// Revision
//
// You can specify all the values or you can default the Revision and Build Numbers
// by using the '*' as shown below:
[assembly: AssemblyVersion("7.21.0.0")]
//
// In order to sign your assembly you must specify a key to use. Refer to the
// Microsoft .NET Framework documentation for more information on assembly signing.
//
// Use the attributes below to control which key is used for signing.
//
// Notes:
// (*) If no key is specified, the assembly is not signed.
// (*) KeyName refers to a key that has been installed in the Crypto Service
// Provider (CSP) on your machine. KeyFile refers to a file which contains
// a key.
// (*) If the KeyFile and the KeyName values are both specified, the
// following processing occurs:
// (1) If the KeyName can be found in the CSP, that key is used.
// (2) If the KeyName does not exist and the KeyFile does exist, the key
// in the KeyFile is installed into the CSP and used.
// (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
// When specifying the KeyFile, the location of the KeyFile should be
// relative to the project output directory which is
// %Project Directory%\obj\<configuration>. For example, if your KeyFile is
// located in the project directory, you would specify the AssemblyKeyFile
// attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
// (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
// documentation for more information on this.
//
[assembly: AssemblyDelaySign(false)]
[assembly: AssemblyKeyFile("")]
[assembly: AssemblyKeyName("")]
Form1.cs
using System;
using System.Drawing;
using System.Collections;
using System.ComponentModel;
using System.Windows.Forms;
using System.Data;
using System.IO;
using System.Diagnostics;
using System.Reflection;
using System.Resources;
using FlexCel.Core;
using FlexCel.XlsAdapter;
using FlexCel.Report;
using FlexCel.Demo.SharedData;
namespace MergingSimilarCells
{
public partial class mainForm: System.Windows.Forms.Form
{
public mainForm()
{
InitializeComponent();
}
private void button1_Click(object sender, System.EventArgs e)
{
AutoRun();
}
public void AutoRun()
{
using (FlexCelReport ordersReport = SharedData.CreateReport())
{
string DataPath = Path.Combine(Path.Combine(Path.GetDirectoryName(Assembly.GetExecutingAssembly().Location), ".."), "..") + Path.DirectorySeparatorChar;
if (saveFileDialog1.ShowDialog() == DialogResult.OK)
{
ordersReport.Run(DataPath + "Merging Similar Cells.template.xls", saveFileDialog1.FileName);
if (MessageBox.Show("Do you want to open the generated file?", "Confirm", MessageBoxButtons.YesNo) == DialogResult.Yes)
{
using (Process p = new Process())
{
p.StartInfo.FileName = saveFileDialog1.FileName;
p.StartInfo.UseShellExecute = true;
p.Start();
}
}
}
}
}
private void btnCancel_Click(object sender, System.EventArgs e)
{
Close();
}
}
}
Form1.Designer.cs
using System;
using System.Drawing;
using System.Collections;
using System.ComponentModel;
using System.Windows.Forms;
using System.Data;
using System.IO;
using System.Diagnostics;
using System.Reflection;
using System.Resources;
using FlexCel.Core;
using FlexCel.XlsAdapter;
using FlexCel.Report;
using FlexCel.Demo.SharedData;
namespace MergingSimilarCells
{
public partial class mainForm: System.Windows.Forms.Form
{
private System.Windows.Forms.Button button1;
private System.Windows.Forms.SaveFileDialog saveFileDialog1;
private System.Windows.Forms.Label label1;
private System.Windows.Forms.Button btnCancel;
/// <summary>
/// Required designer variable.
/// </summary>
private System.ComponentModel.Container components = null;
/// <summary>
/// Clean up any resources being used.
/// </summary>
protected override void Dispose(bool disposing)
{
if (disposing)
{
if ((components != null))
{
components.Dispose();
}
}
base.Dispose(disposing);
}
#region "Windows Form Designer generated code"
/// <summary>
/// Required method for Designer support - do not modify
/// the contents of this method with the code editor.
/// </summary>
private void InitializeComponent()
{
this.button1 = new System.Windows.Forms.Button();
this.saveFileDialog1 = new System.Windows.Forms.SaveFileDialog();
this.label1 = new System.Windows.Forms.Label();
this.btnCancel = new System.Windows.Forms.Button();
this.SuspendLayout();
//
// button1
//
this.button1.Anchor = ((System.Windows.Forms.AnchorStyles)((System.Windows.Forms.AnchorStyles.Top | System.Windows.Forms.AnchorStyles.Right)));
this.button1.BackColor = System.Drawing.Color.Green;
this.button1.ForeColor = System.Drawing.Color.White;
this.button1.Location = new System.Drawing.Point(152, 88);
this.button1.Name = "button1";
this.button1.Size = new System.Drawing.Size(112, 23);
this.button1.TabIndex = 0;
this.button1.Text = "GO!";
this.button1.UseVisualStyleBackColor = false;
this.button1.Click += new System.EventHandler(this.button1_Click);
//
// saveFileDialog1
//
this.saveFileDialog1.Filter = "Excel Files|*.xls;*.xlsx;*.xlsm|Excel 97/2003|*.xls|Excel 2007|*.xlsx;*.xlsm|All files|*.*";
this.saveFileDialog1.RestoreDirectory = true;
//
// label1
//
this.label1.Location = new System.Drawing.Point(24, 24);
this.label1.Name = "label1";
this.label1.Size = new System.Drawing.Size(352, 24);
this.label1.TabIndex = 2;
this.label1.Text = "A demo on how to merge similar cells when creating a report";
//
// btnCancel
//
this.btnCancel.Anchor = ((System.Windows.Forms.AnchorStyles)((System.Windows.Forms.AnchorStyles.Top | System.Windows.Forms.AnchorStyles.Right)));
this.btnCancel.BackColor = System.Drawing.Color.FromArgb(((int)(((byte)(192)))), ((int)(((byte)(0)))), ((int)(((byte)(0)))));
this.btnCancel.DialogResult = System.Windows.Forms.DialogResult.Cancel;
this.btnCancel.ForeColor = System.Drawing.Color.White;
this.btnCancel.Location = new System.Drawing.Point(272, 88);
this.btnCancel.Name = "btnCancel";
this.btnCancel.Size = new System.Drawing.Size(112, 23);
this.btnCancel.TabIndex = 3;
this.btnCancel.Text = "Cancel";
this.btnCancel.UseVisualStyleBackColor = false;
this.btnCancel.Click += new System.EventHandler(this.btnCancel_Click);
//
// mainForm
//
this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 13F);
this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
this.ClientSize = new System.Drawing.Size(416, 133);
this.Controls.Add(this.btnCancel);
this.Controls.Add(this.label1);
this.Controls.Add(this.button1);
this.Name = "mainForm";
this.Text = "Merging similar cells";
this.ResumeLayout(false);
}
#endregion
}
}
Program.cs
using System;
using System.Windows.Forms;
namespace MergingSimilarCells
{
static class Program
{
/// <summary>
/// The main entry point for the application.
/// </summary>
[STAThread]
static void Main()
{
Application.EnableVisualStyles();
Application.SetCompatibleTextRenderingDefault(false);
Application.Run(new mainForm());
}
}
}