Table of Contents

IChart3DOptions Interface

Holds the 3D properties of the chart.

Syntax

Unit: FlexCel.Core

IChart3DOptions = interface(IInterface);

Properties

Name Description
XRotation Specifies the amount a 3-D chart shall be rotated in the X direction in degrees. Must be between -90 and 90.
YRotation Specifies the amount a 3-D chart shall be rotated in the Y direction in degrees. Must be between 0 and 360.
HeightPercent Height of a 3-D chart as a percentage of the chart width. Must be between 5%% and 500%%.
DepthPercent Depth of the 3-D plot area as a percentage of its width. Must be between 1 and 2000.
Perspective Specifies the field of view angle for the 3-D chart in degrees. Must be between 0 and 100.
IMPORTANT: In Excel 2007 or newer, this value is displayed on screen in 1/2 degrees instead of degrees, so it will show as the double of the value you see here. In Excel 2003 or older it is displayed in degrees instead.